Steps to keep your diesel generator running optimally
Check below steps to make your diesel generator safe and running optimally
1. Cooling System for Diesel Generators
Checks coolant level during shutdown periods at the specified interval. Remove the radiator cap after allowing the engine to cool and, if necessary, add coolant until the level is approximately 3/4”.
Heavy duty diesel engines require a balanced mix of water, antifreeze and coolant additives. Cooling system is a very important part of generators so always buy a powerfull generator from a best diesel generator company
2. Fuel System
Diesel is subject to contamination and corrosion within a period of one year, therefore regular exercise of the generator set is recommended to use the stored fuel before it degrades. Fuel filters must be drained at designated intervals due to water vapor that collects and condenses in the fuel tank.
Regular fuel testing and polishing may be required if fuel is not used and replaced in three to six months. Preventive maintenance should include a regular general inspection that includes checking the coolant level, oil level, fuel system, and starting system. Charge air cooler pipes and hoses should be inspected regularly for leaks, holes, cracks, dirt and debris that may be blocking fins or loose connections.
3. Battery Check
Weak or undercharged starting batteries are a common cause of standby power system failure. The battery should be kept fully charged and in good condition to prevent it from going down by regular testing and inspection to know the current status of the battery and avoid any generator starting problems. The steps are the following:
- battery test
- Battery cleaning
- Specific Gravity Verification
- Electrolyte level check
Post a Comment